混凝土切底自攻锚栓FBS II 6-10，采用镀锌钢、多层涂层钢CP和不锈钢R制造，对粘土砖(EN771-1)、实心灰砂砖(EN771-2)和多孔灰砂砖(EN771-2)有ETA认证，可灵活应用于不同基材。
混凝土切底自攻锚栓FBS II 6-10，采用镀锌钢、多层涂层钢和不锈钢R制造，在砌体砖中的安装可以在灰缝或抹灰基材上进行，也可成组安装。
应用和认证
应用
护栏
控制台/底板
金属型材
钢结构
幕墙
保护屏障
基材
认证可用于:
混凝土C20/25至C50/60，开裂非开裂
也适用于:
混凝土C12/15
实心建筑材料
致密砌体
您可以在注册文件中找到有关建筑材料的详细信息。
批准
ETA-15/0352
ETA-20/0134
DoP No. 0185
DoP No. 0227
DoP No. 0311
20200238-2
安装说明
功能性
The UltraCut FBS II CP US is suitable for push-through installation.
Cleaning the drilled hole is not necessary for installation in ceilings and floors, and when using hollow drills. For drill holes in floors, you must drill 3x deeper than the drill diameter.
A tangential impact wrench with a suitable nut is recommended for installation (recommended: fischer FSS 18V).
If the screw head is in contact with the fixture, the correct installation of the screw is ensured (visual setting check).
Concrete screw Ultracut FBS II US hexagon head with integral washer and FBS II SK countersunk head - Permissible loads of a single anchor in normal concrete of strength class C20/25.
